Abstract
Nickel (Ni) / indium tin oxide (ITO) nanostructures were deposited on silicon (111) substrate by RF magnetron sputtering using a nickel target and metallic alloy target (In-Sn, 90%-10%). The post-deposition annealing has been done for Ni/ITO films in air and the effect of annealing temperature on the surface morphology of ITO films was studied. It has been found that the annealing temperatures increase the film surface roughness in Ni/ITO structure. At annealing temperature of 600°C, AFM analysis reveals the highest root mean square roughness, peak to valley and thickness value of 2.598 nm, 59.115 nm, and 11.358 nm, respectively. Watershed analysis on AFM images show that the numbers of grain boundaries in Ni/ITO are reduced when annealing temperature is increased to higher temperatures.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.