Abstract
In the present work, cryorolling (CR) (rolling temperature is − 196 °C) followed by annealing (AN) (100–400 °C for 1 h) of 6082 Al alloy has been performed. The main objective of this study was to investigate the thermal stability of the ultrafine-grained 6082 Al alloy, for higher temperature applications. The mechanical properties of the CR and the CR + AN 6082 Al alloy were investigated and correlated with the microstructure with the help of a transmission electron microscope (TEM). The hardness and the tensile strength of the CR + AN (150 °C) 6082 Al alloy were significantly improved up to 95% and 40%, respectively, when compared to the solution-treated (ST) 6082 Al alloy. The main reason behind the mechanical strength improvement was dislocation strengthening and precipitation strengthening. Thermal stability of the CR 6082 Al alloy was found up to a high annealing temperature of 300 °C due to the pinning of grain boundaries by precipitates evaluation during annealing by Zener drag effect. The formation of β″-phase, β′-phase and stable β-phase occurred at the annealing temperatures of 175 °C for 1 h, 200 °C for 1 h and 250 °C for 1 h, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
