Effect of Annealing after Casting and Cold Rolling on Microstructure and Electrochemical Behavior of High-Entropy Alloy, Cantor

Abstract

High-entropy alloys (HEAs), a relatively new class of materials, have attracted significant attention in materials science owing to their unique properties and potential applications. High entropy stabilizes the phase of a solid solution over a wide range of chemical compositions, yielding unique properties superior to those of conventional alloys. Therefore, this study analyzed the microstructure and electrochemical behavior of HEAs (Cantor) to evaluate their corrosion resistance, according to their manufacturing process (casting, cold rolling, and annealing). The microstructural morphologies and sizes were analyzed using electron backscatter diffraction. The electrochemical behavior was examined using open circuit potential measurements, electrochemical impedance spectroscopy, potentiodynamic polarization tests, and critical pitting temperature measurements using a potentiostat. The casting process formed a nonuniform microstructure (average grain size = 19 μm). The cold rolling process caused the formation of fine grains (size = 4 μm). A uniform microstructure (grain size > 151 μm) was formed after heat treatment. The corrosion resistance of the HEAs was determined from the passivation layer formed by Cr oxidation. These microstructural differences resulted in variations in the electrochemical behavior. Microstructural and electrochemical analyses are crucial because HEAs have diverse potential applications. Therefore, this study contributes to future improvements in HEA manufacturing processes.