Effect of anion (S−2 & Se−2) replacement on photovoltaic properties in transition metal (Ba-Barium) chalcogenide perovskites

Abstract

Material scientists have stepped up their search for efficient materials in low-cost, high-stability, nontoxic energy conversion devices. In this paper, emerging materials inspire us to study one of the perovskite chalcogens made from alkaline-earth metals (Barelium). Therefore, we determined some fundamental properties with some application-based properties, which explained their applicability in energy conversion device fabrication by first-principles calculation within the WIEN2K Code. Structure stability has been verified by Birch–Murnaghan fits and thermal stability at different temperatures and pressure ranges is explained by Gibbs function in thermodynamic properties. By using modified Becke–Johnson (mBJ) potential, electronic and optical characteristics of these materials provide insight into their nature: they were revealed to be direct bandgap semiconductors with the calculated values of 1.77[Formula: see text]eV (1.25[Formula: see text]eV) for BaZrS3(BaZrSe3), respectively. Both materials exhibit transparency on low-energy striking photons and demonstrate absorption and optical conduction in the UV region. Both materials exhibit transparency on low-energy striking photons and demonstrate absorption and optical conduction in the UV region. In the thermoelectric parameter, the figure of merit (ZT) is unity at room temperature and decreases up to 0.98 with temperature increment which reveals that these materials will be helpful in thermoelectric devices. As per the application part, we carried out the calculation of the spectroscopic limited maximum efficiency (SLME) and found that efficiency increases from 6.5% to 27.1% (8.1% to 31.9%) for BaZrS3 (BaZrSe3), respectively. The film thickness increased from 100[Formula: see text]nm to 1[Formula: see text][Formula: see text]m at room temperature and then stabilized. This emerging study shows that these materials can be used as an alert substance in energy conversion device fabrications and the proposed outcomes are in good acceptance with the experimental and other theoretical data. As per the optical and thermoelectric parameters of these materials, we infer that both are promising candidates in energy conversion device fabrication.