Abstract

The dynamics of coherent structures that develop within laminar separation bubbles over a NACA 0018 airfoil at Rec = 100 000 and Angles of Attack (AOA) of 0°, 5°, 8°, and 10° are investigated experimentally using a high-speed flow visualization technique and vortex tracking via embedded microphones. The results identify vortex shedding within the separation bubble for all the cases investigated. The vortices form upstream of mean transition location and break down in the vicinity of mean reattachment, with irregular vortex merging events detected in the aft portion of the separation bubble. As the mean size of the separation bubble decreases with increasing angle of attack, vortex shedding characteristics also change appreciably, with shedding frequency increasing and characteristic streamwise wavelength decreasing. However, vortex roll up and salient aspects of vortex development take place within approximately the same regions downstream of separation location in terms of percentage of the bubble length. For all the cases examined, significant cycle-to-cycle variability is observed in salient vortex characteristics, being particularly pronounced in the aft portion of the bubble where vortex merging occurs and significant spanwise deformations of vortex filaments are expected. Merging of the shear layer vortices is shown to occur irregularly between the mean transition and reattachment location, with merging events separated by a relatively wide range of shedding cycles. As the angle of attack increases from AOA = 5° to 10°, the fraction of primary vortices involved in merging increases up to about 25%. However, enhancement in vortex merging is also noted at lower AOA where shedding occurs close to the trailing edge, which is speculated to be linked to upstream scattering of periodic pressure fluctuations induced at the trailing edge.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.