Effect of amphoteric surfactant on phase behavior of hydrocarbon-electrolyte-water system-an application in enhanced oil recovery

Abstract

ABSTRACTThe different techniques such as enhanced oil recovery (EOR) and improved oil recovery (IOR) have been used to enhance oil production. The surfactant flooding is a tertiary oil recovery technique that has been widely used in oil field industry. A variety of surfactant chemicals have been used in which among them the amphoteric type, which has two groups of opposite charges, needs more investigation. In this work, we use cocamidopropyl betaine as an amphoteric surfactant that is used to investigate its influence on the aquifer + hydrocarbon system. The effects of surfactant concentration, salinity, and hydrocarbon type on the phase behavior of the various saline aqueous-hydrocarbon mixtures are investigated. Moreover, the surfactant flooding is carried out using a glass micromodel. Thus, to investigate the wettability, the contact angle is also measured for the present system that it is an influential factor in oil recovery. First, by increasing salinity from 0 wt% to 20 wt% in n-hexadecane, the phase change take placed so that a Winsor formation from type I to III and then to type II occurs. However, for n-heptane upon enhancing salinity, Winsor type III is transformed to type II so that hydrocarbon (oil) recovery increases and break through occurs with a delay. By increasing salinity, water solubilization parameter decreases for both hydrocarbon and by enhancing both surfactant concentration and salinity leads to reduce the contact angle. Thus, cocamidopropyl betaine works better for the longer hydrocarbon chain.In the micromodel flooding test upon formation of Winsor II, the recovery is higher and the break through takes place with a delay. However, for the case of Winsor I, the recovery is lower and the break through occurs earlier. Finally, one can conclude that the low concentration of amphoteric surfactants needs to use that plays an important role in chemical EOR and results a higher recovery in high salinity.