Abstract
The effect of annealing temperature on grain growth, texture development and magnetic properties of Al-free and Al-1% added non-oriented electrical steel were investigated. Normal grain growth occurred in Al-free steel. On the other hand, abnormal grain growth occurred in Al-added steel which was annealed at 800°C for 24h. Precipitates in these two steels were different. TiN precipitated in Alfree steel, but in the case of Al-added steel, AlN and TiC precipitated. The TiC in Al-added steel was so fine that it inhibited the normal grain growth and finally caused the abnormal grain growth. Main textures of both steels were near {111}<112>, but the intensity of near {111}<112> in the abnormal grain growth was higher than that in the normal grain growth. Magnetic flux density (B50/Bs) was decreased by the grain growth. Especially B50/Bs in the abnormal grain growth was lower than that in normal grain growth. B50/Bs in these steels can be estimated by their three-dimensional textures in vector method.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
