Abstract
AbstractThis study investigated the effect of kaolin acid activation on alumina losses, surface area changes and oil bleaching performance. Ground kaolin was treated with hydrochloric or citric acid, and bleaching tests were performed on rice bran oil. The adsorption studies showed that the optimal bleaching of ~83 or ~81 % were achieved by activation with 0.5 M hydrochloric or citric acid, respectively, whereas bleaching with a commercial clay was ~82 %. The highest bleaching value was not associated with the maximum clay surface area or porosity. X‐ray fluorescence showed that alumina contents of 31–34 % were suggestive for optimum bleaching depending on the different acid used. Treating ground kaolin with the same hydrochloric acid strength by varying the acid concentration and clay/acid ratio also confirmed that the best Al3+ content was ~32 %, and a value lower than one indicated the extensively destruction of kaolinite proportions leading to a decrease in its bleaching capacity, even though it had the maximum surface area. The decrease in capacity was due to the reduction of alumina content, and the parallel formation of high amorphous silica was favorable for the adsorption of anionic pigments, such as chlorophyll‐a.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.