Abstract
The influence of NaOH on pore structure, reaction kinetics, volume, and morphology of reaction products in high-volume-fly-ash mixtures was explored by two mixing methods: (i) direct addition of 0.2 M, 0.5 M and 1.0 M NaOH solution into cement-FA powder, and (ii) pre-dissolving FA into NaOH solution before mixing with cement. The pre-dissolution technique improved early-age mechanical performance by enhancing Si release, aiding the expedited precipitation of extra C-A-S-H gel. Both methods improved the degree of FA reaction and alite/belite hydration. However, 1.0 M NaOH negatively affected the strength and microstructure properties due to undesirable silica-gel formation, C-A-S-H gel carbonation, and increased capillary pore volume. NaOH concentration has affected the packing density of C-A-S-H gel, where high-pH systems exhibit loosely packed sheet-like clusters. Ca/Si of C-A-S-H gel in low and high pH systems evolved with increased curing age, with low pH system exhibiting high Ca/Si at 90 days.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callSimilar Papers
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
