Abstract
Aluminum substituted lithium ferrites with chemical formula Li0.6 (Ni Co)0.2Alx Fe2.2−x O4 (x = 0.0 ,0.15,0.3,0.45,0.6) have been synthesized by sol-gel method and sintered at 900 °C for 5 h. The samples were characterized by XRD, electrical, dielectric and VSM measurements. X-ray diffraction studies confirmed that all the samples exhibit single phase cubic spinel structure with space group Fd3m. The crystallite size, bond lengths, x-ray density and lattice parameters decrease with the increase of Al3+ concentration. Dielectric properties such as dielectric constant (ε′), complex dielectric constant (ε″), tangent loss (tanδ) and ac conductivity (σac) of all the samples were measured and evaluated as a function of frequency at room temperature. The variation of dielectric properties; ε′, ε″, tan and σac versus frequency reveals that the dispersion is due to Maxwell–Wagner type of interfacial polarization in general and the hopping of charge between Fe2+ and Fe3+. The Al-doped nano-crystalline lithium ferrite samples exhibit a very large value of dielectric constant of the order of 104. The room temperature resistivity and activation energy increases with the increase of Al3+ concentration. The temperature dependent resistivity of all samples decreases with increase of temperature indicating the semiconducting behavior. The room temperature DC resistivity increases from 1.65 × 1010 to 2.23 × 1011 ohm-cm. The small value of magnetization may be due to canting superparamagnetic spins at the surface of the samples. The decrease in the magnitude of magnetization value may also be due to the presence of Al3+ paramagnetic ions with spin-down orientation instead of Fe3+ cations with spin-up orientation in the octahedral sites. The squareness ratio (Mr/Ms) is less than 1 which indicates single domain behavior. The increase in coercivity is attributed to lattice defects and decrease is associated with the superparamagnetic behavior.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
