Abstract
In order to upgrade the utilization of flue gas desulfurization (FGD) gypsum, crystal modifier aluminum sulfate (Al2(SO4)3) was added into FGD gypsum to prepare calcined gypsum by calcining at normal pressure, and the effect of Al2(SO4)3 addition on the performance of calcined gypsum was studied. The results show that the addition of Al2(SO4)3 to FGD gypsum is slightly beneficial to promote the crystallization of hemihydrate gypsum (HH) along the a-axis direction. The Al2(SO4)3 addition also has a quick-setting effect on gypsum plaster during the hydration process, meanwhile inhibiting the growth of the (020) crystal plane of dihydrate gypsum (DH), then promoting uniform growth and aggregation along the c-axis. The close stacking makes hardened gypsum body dense and improves the strength of calcined gypsum. The strength of calcined gypsum prepared by calcining FGD gypsum with Al2(SO4)3 of 0.6 wt.% at 170 ℃ for 2 h is the highest. 2 h and 7 d flexural strength are 3.80 MPa and 7.20 MPa, and 2 h and 7 d compressive strength are 9.05 MPa and 19.23 MPa, respectively. In addition, 2 h flexural and compressive strength of the calcined gypsum with 0.6 ~ 1.0 wt.% of Al2(SO4)3 prepared at 170 ~ 180 ℃ for 2 h increase by 16 ~ 22 % and 20 ~ 33 %, respectively, which is very advantageous for the high value-added reuse of FGD gypsum for the preparation of high-quality calcined gypsum.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.