Abstract
Zn-Al alloy with the addition of Al (5–25 wt.%) was fabricated into as–cast and rod–shaped alloys. SEM/EDS and XRD technology were used to examine the impacts of the Al–element content on the alloys’ microstructure, mechanical characteristics, electrical conductivity, wetting ability, and corrosion resistance. The findings demonstrate how the Zn-Al alloy’s microstructure is dramatically altered by the different additions of the Al content. When the Al content reaches 15 wt.%, the eutectoid structures of the as–cast Zn-Al alloy are the finest, and the microhardness and tensile strength of the extruded–state alloy reach their maximum and exhibit the best corrosion resistance. The spreading area of the Zn-15Al solder alloy achieves its maximum on the 6061 Al plate, while it reaches its minimum on the T2 Cu plate. Furthermore, the electrical resistivity of the Zn-Al alloy continuously decreases as the Al content increases.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
