Effect of Al-5Ti-1B on the microstructure of near-eutectic Al-13.0%Si alloys modified with Sr

Abstract

The addition of Sr in Al-Si alloys as a modifier causes a transition of the morphology of eutectic silicon from coarse plate-like or acicular to fine fibrous. However, it may also lead to the formation of long columnar dendritic α-Al phase. Al-5Ti-1B master alloy is often used as a grain refiner to achieve the fine equaixed grains in aluminum and aluminum alloys. The aim of the present study is to highlight the effect of Al-5Ti-1B master alloy additions on the microstructure of near-eutectic Al-Si alloys modified with Sr. When the addition of Al-5Ti-1B master alloy was below 0.82 mass%, the dendritic α-Al phase changed from long columnar to equiaxed, and there were no noticeable changes of the morphology and size of eutectic silicon, while the size of eutectic cells decreased slightly. However, when the addition was above 0.82 mass%, the deleterious influence of Al-5Ti-1B master alloy on the modification effect of Sr emerged and with further increases in addition level a fully unmodified microstructure was finally produced. The results indicate that the effective Sr in the melt decreases with increased addition of Al-5Ti-1B. The poisoning event of Al-5Ti-1B master alloy on the modification of Sr is supposed to be related with the interaction between Sr and Ti.