Effect of Aging State on the Microstructure and Tensile Properties of Al-7.0Zn-2.5Mg-2.0Cu-0.1Zr-0.2Sc Alloy

Abstract

Tensile experiments were conducted for Al-7.0Zn-2.5Mg-2.0Cu-0.1Zr-0.2Sc alloy in different aging states (18 h, 24 h, 36 h) with temperature environments including room temperature, −10 °C and −30 °C. Comparative studies were made on the evolution of the precipitate phase in alloys at three kinds of aging times and the evolution of tensile properties in alloys under different ambient temperatures. The findings showed that the precipitates in Al-7.0Zn-2.5Mg-2.0Cu-0.1Zr-0.2Sc alloy were mainly in the GP zone after the solution + aging treatment η’ phase, the secondary Al3 (Sc, Zr) phase and the θ’ (Al2Cu) phase. As the aging time was prolonged, the η’ phase gradually grew and the PFZ gradually widened. At the three test temperatures, the tensile strength (TS) and yield strength (YS) of the alloys both showed a trend of first increasing before decreasing with the extension of aging time, while the elongation (A) and section shrinkage (Z) showed a decreasing trend. As the test temperature decreased, the TS and YS of the alloys increased and the A and Z of the alloys decreased. At room temperature, alloys showed a ductile fracture mode, which changed to mixed ductile and brittle fracture with decreasing test temperature.