Abstract

The effects of aging on martensitic transformation, thermoelastic and fracture behavior were investigated in the Mn53Ni 25Ga22 ferromagnetic shape memory alloy. The results show that precipitation has obvious effects on the phase transformation behavior and fracture behavior. The transformation temperature gradually decreases and then increases when the samples are aged at increasing temperatures, reaching the minimum value at an aging temperature of 773K for 3h, which is mainly attributable to elemental diffusion between the matrix and the precipitate. The enthalpy and entropy changes rapidly increase and then gradually decrease with an increase in the aging temperature, reaching their minimum values at an aging temperature of 573K. Moreover, the brittleness, low strength and poor processability of Mn–Ni–Ga alloys greatly limit their application. We attempted to improve the mechanical properties without sacrificing the magnetic and thermoelastic properties by using appropriate aging treatments. The highest compressive strength and compression strain of 1594MPa and 20.3% were obtained in alloys aged at 673K and 573K for 3h, respectively. These values are approximately 750MPa and 8% higher than the solution-treated Mn53Ni25Ga22 alloy. As a result, the improvements in the mechanical properties of Mn53Ni25Ga22 alloys from the aging treatments are mainly due to changes in the fracture type from intergranular brittleness to a quasi-cleavage ductile fracture. By controlling the number and the size of the precipitates and aging at a temperature no higher than 773K for no more than 3h, a significant improvement in the compressive strength and ductility of the alloys can be expected through the fine-tuning of the small precipitates.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.