Abstract
Taking the GH783 alloy bolt of intermediate pressure main stop valve used in 1000 MW ultra-supercritical unit as the research object, the optical microscope (OM), scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffractometer (XRD) and mechanical performance tests were carried out to study the microstructure transformation and mechanical properties of GH783 alloy bolts at different aging stages under 650 °C aging environment. The results showed that the secondary needle β phase began to appear in the bolts aged for 1000 h, and the density of secondary β-phases in bolts aged for 3000 h significantly increased. When the aging time reached up to 20,000 h, the secondary β phase coarsened significantly. At the same time, as the aging time prolonged, the morphology and quantity of the primary β phase changed significantly. In terms of mechanical properties, the tensile strength and impact toughness of the bolts gradually decreased. This was due to the growing γ' phase, the formation of Ni5Al3 phase and the Nb-rich Laves phase in the structure during the aging process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.