Effect of Aeration and Agitation Regimes on Lipase Production by Newly Isolated Rhodotorula mucilaginosa–MTCC 8737 in Stirred Tank Reactor Using Molasses as Sole Production Medium

Abstract

The influence of media and process parameters (aeration and agitation) on fermentation broth rheology and biomass formation has been studied in 1.5-l stirred tank reactor for lipase production using Rhodotorula mucilaginosa MTCC 8737. Molasses, as sole production medium, is used for lipase production by varying aeration (1, 2, and 3 vvm) and agitation speeds (100, 200, and 300 rpm). Maximum lipase activity of 72 U/ml was obtained during 96 h of fermentation at 2 vvm, 200 rpm, pH 7, and 25 +/- 2 degrees C temperature. Lipase production kinetics with respect to dry cell weight of biomass showed Y (P/S) of 25.71 U/mg, specific product formation of 10.9 U/mg DC, and Y (X/S) 2.35 mg/mg. Maximum lipase activity (MC 2) of 56 U/ml was observed at 1% molasses, and a further increase in the molasses concentration of (%) 1.5 and 2 inhibited the product formation of lipase with 15 and 8.5 U/ml, respectively. The production kinetics of molasses media showed Y (P/X) was 14 U/mg DC, Y (P/S) 16 U/mg, and Y (X/S) 1.14 mg/mg during 96 h of bioreactor operation. The k(L)a values for all batches (MC 1-MC 4) at 96 h of fermentation were 32, 28, 21, and 19/h, and the |oxygen transfer rate were 54.4, 56, 35.7, and 17.29 mg/l h, respectively. Increase in molasses concentration resulted in decreased lipase activity by increase in viscosity of the fermentation broth.