Abstract
Hybrid alkaline cement is a class of alkaline cement resulted from alkali activation of the medium calcium content of aluminosilicate materials. This paper presents an experimental analysis of alkali activators effect on strength of hybrid alkaline cement produced from 80% fly ash and 20% ordinary Portland cement. Two alkali activators were observed i.e. 5% sodium sulfate and a combination of 5% of sodium sulfate-1.1 M SiO2 of sodium silicate solution. Compressive strength tests were performed on 20mmx 40mm cylinder paste specimens while setting time tests were conducted by Vicat needle. Scanning electron microscopy analysis and measurement of fly ash reaction degree were performed to explain the compressive strength of paste. It is concluded that addition of soluble silicate on the dry mix of hybrid cement-sodium sulfate activator reduce compressive strength and shorten the setting time. Both of activators give relative low fly ash reaction degree.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Materials Science and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
