Abstract
Due to diminishing fossil fuel, energy alternative availability becomes very crucial. Bio-oil is one of the alternative energy sources obtaining from the biomass pyrolysis process. This study's aim is to determine the effect of temperature and the addition of catalysts in the pyrolysis process. The catalyst was made of natural zeolite which was activated with an H2SO4 solution of 0.5 N and then heated at 350 °C for 12 hours. The pyrolysis of dry pine cone powder was run in a fluidized bed reactor enclosed by a furnace at a heating rate of 15 °C/min and residence time for 3 hours. From the existing variations, the largest bio-oil yield i.e. 34.28% was obtained from non-catalytic pyrolysis at the temperature of 500 °C, however, the bio-oil conceived high acids. On the other hand, the bio-oil comprised high phenolics and aromatics were generated from catalytic pyrolysis with 5% wt catalyst at a temperature of 500 °C. Eventually, the bio-oil from Pinus Merkusii cone has the potential to be biofuel and biochemical materials.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have