Abstract
Different types of acid pretreatment are known to influence the removal of certain components from pine wood sawdust, due to differences in the acid hydrolysis, which also predetermine the final formation and adsorptive properties of the produced activated carbon (AC) through subsequent potassium hydroxide activation. AC made by using phosphorous acid as an acid pretreatment had the largest absorption capacity of methylene blue (MB) dye due to its highest acidity. Subsequently, the effects on the adsorption variables for this AC such as initial pH, MB concentration, contact time and temperature were investigated. The resulting adsorption process was classified as pseudo-second-order kinetic model, and the Langmuir isotherm model better described the equilibrium data in comparison with the Freundlich isotherm model. The outcome showed that a lower temperature had an increased adsorption capacity of sawdust-derived AC pretreated with phosphorous acid, which allowed maximum adsorption capacities of 303.03 mg/g at 30 °C, implying that the adsorption was an endothermic process. Phosphorous acid pretreatment and activation processes proved to be an effective strategy to prepare highly porous AC from sawdust, with high potential to cationic dye removal from liquid phases.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
