Abstract
A new process combining 4% prestrain, intercritical annealing, quenching, and partitioning (prestrain–IA–Q&P) is used to investigate the effect of tensile number on the microstructure and mechanical properties of medium‐manganese steels. A microstructural model is built based on the specimens’ microstructure and mechanical properties. The amount of tiny brilliant white carbide particles precipitated in the microstructure seems to grow with the number of stretches. The test steel's tensile strength first decreases and then increases. However, the product of tensile strength and elongation exhibits the opposite trend. The new process improves test steel elongation compared with IA–Q&P. This might be because multiple stretches have destroyed the original microstructure of the test steel. Consequently, the test steel generated more deformation bands and dislocation energy. Simultaneously, grain refinement and carbide precipitation in the test steel increase the nucleation point of austenite, resulting in a diffuse distribution of the retained austenite. The tested steel is stretched numerous times, enhancing the capacity of the microstructure's ferrite/martensite/retained austenite to accept dislocations, and there is increased dislocation slip and back stress production between the microstructures. As a result, test steel's ductility is increased by the transformation induced plasticity effect of retained austenite and the synergistic deformation of ferrite.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.