Abstract
Phosphorus is a crucial element in the eutrophication process. According to China’s water pollutant discharge Class 1A standard, treated wastewater must meet 0.5 mg/L of phosphorus prior to discharge to a sensitive water body. In recent years, wastewater treatment technologies such as membrane bioreactors have been demonstrated to achieve high-quality effluent and present the potential for wastewater reuse applications. However, an efficient and cost-effective phosphorus removal process is still not warranted. In this study, a submerged membrane bioreactor (SMBR) with addition of a low concentration of aluminum sulfate ([mol Al : mol P ≤ 1] was used to evaluate its treatment performance. The results showed that significant phosphorus removal could be achieved with addition of a low aluminum sulfate dosage to meet national phosphorus discharge standard; however, no significant effect was observed on the removal of COD and ammonia. The addition of a low concentration of aluminum sulfate could offer as an economical solution to increase the phos phorus removal efficiency of a SMBR, and thereby improve the water quality of the water bodies.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
