Abstract
The Sn-58Bi (SB) lead free solder alloy tested in this research with addition of 3% Molybdenum (Mo) nanoparticles equivalent to 0.6g mass to analyse the influences in the thermal, microstructure and microhardness. Elevation of 3.8°C was observed from the Differential Scanning Calorimetry (DSC) for the 3% Mo nanoparticles added SB solder alloy compared to the bare Sn-58Bi (SB) solder alloy that has a melting temperature of 142.25°C. The microstructures of the reinforced SB solder alloy were refined with closer lamellar structures of ?-Sn and Bi phases compared to the unreinforced SB solder. The SEM/EDX and X-ray Diffraction (XRD) results validate the presence of the 3% Mo nanoparticles in the SB solder. Mechanical properties by means of Vickers microhardness of the Mo reinforced solder alloy showed an increment in hardness value by 2% compared to the bare SB solder alloy. The presence of 3% Mo as discrete particles (dispersion strengthening) contributes to the increase on the hardness value. The introduction of 3% Mo in to the SB solder alloy resulted in increase in the hardness due to the refinement of the microstructure and at the same time allows low temperature soldering in the electronic packaging industry.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
