Abstract

The problem of emitter clogging has become the main obstacle restricting the application and promotion of drip irrigation technology. Studying the process of emitter clogging helps improve irrigation efficiency and save water resources. A large number of researchers have tried to solve the problem of emitter clogging from many perspectives. However, the influence of micro-nano bubbles as well as generated blockage on the clogging process of drip irrigation systems is less studied. Here, the influence of aeration on emitter clogging was studied by adding micro-nano bubbles to groundwater. Four different emitters were selected. Two treatments, micro-nano aeration and non-aeration, were set up, with a total of eight sets of experiments, running for 1500 h. The degree of emitter clogging was quantitatively characterized using the discharge ratio variation (Dra). The Christiansen uniformity coefficient (Cu) and statistical uniformity coefficient (Us) were used to evaluate the influence of emitter clogging on the performance of the drip irrigation system. Compared with the non-aeration treatment group, the Dra of aerated E1–E4 decreased by 64.74%, 54.22%, 64.20%, and 94.69% in 800 h, respectively. At the same time, the Us of the aerated E1–E4 decreased by 100%, 60.05%, 92.32%, and 100%, while the Cu of aerated E1–E4 decreased by 76.64%, 53.79%, 74.11%, and 100% compared with the unaerated group. The Cu and Us of all emitters under the aeration treatment were smaller than those comparison group. As for the blockage, the main components were typical physical blockage SiO2 and chemical blockage CaCO3. Most of the blockages in the non-aeration treatment group are 5–10 μm in length, while those in the aerated treatment group were generally less than 5 μm. Aeration treatment made the blockage more broken and dense and more likely to accumulate in the flow channel, obstructing the flow of water and thus intensifying the clogging process. As a result, micro-nano aeration treatment increased the risk of emitter clogging, accelerated the development of blockage in the emitter, and disturbed the uniformity of the entire drip irrigation system. This study provides a reference idea for solving the problem of blockage in drip irrigation systems.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.