Edge smoothing optimization method in DMD digital lithography system based on dynamic blur matching pixel overlap technique.

Abstract

Due to digital micromirrors device (DMD) digital lithography limited by non-integer pixel errors, the edge smoothness of the exposed image is low and the sawtooth defects are obvious. To improve the image edge smoothness, an optimized pixel overlay method was proposed, which called the DMD digital lithography based on dynamic blur effect matching pixel overlay technology. The core of this method is that motion blur effect is cleverly introduced in the process of pixel overlap to carry out the lithography optimization experiment. The simulation and experimental results showed that the sawtooth edge was reduced from 1.666 µm to 0.27 µm by adopting the 1/2 dynamic blur effect to match pixel displacement superposition, which is far less than half of the sawtooth edge before optimization. The results indicated that the proposed method can efficiently improve the edge smoothness of lithographic patterns. We believe that the proposed optimization method can provide great help for high fidelity and efficient DMD digital lithography microfabrication.