Abstract
Main objective of this study is to combining pigment dyeing with N,N’-1,3- dimethylol- 4,5- dihydroxyethylene urea (DMDHEU) durable press finishing in one step pad-dry-cure process. Dry wrinkle recovery angle (WRA), rubbing fastness and colour strength (K/S) values of specimens were measured before and after one/five/ten times washing treatments for determinating optimum process conditions of combining process. The results indicated that good durable press performance and higher dye depth could be obtained with the one step process (80 g/L DMDHEU, 3 g/L pigment dye, 60 g/L binder, 12 g/L catalyst, 10 g/L antimigration agent, cured at 150 °C for 4 min.). It exhibited good abrasion strength and good rubbing fastness values.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
