Abstract
Today, energy occupies a pivotal position around which all socio-economic activities revolve. No energy means no life, and supply of energy in a cheap, plentiful, long-sustainable and environmentally safe form is a boon for everyone. In the light of rising cost of oil and fears of its exhaustion coupled with increased pollution, the governments worldwide are deliberating and making huge strides to promote renewable energy sources such as wind. Integration of wind machines with the diesel plants is pursued widely to reduce dependence on fossil-fuel-produced energy and to reduce the release of carbon gases that cause global climate change. The literature indicates that commercial/residential buildings in the Kingdom of Saudi Arabia (KSA) consume an estimated 10–40% of the total electric energy generated. The aim of this study is to analyse wind-speed data of Dhahran (East-Coast, KSA) to assess the economic feasibility of utilising autonomous hybrid wind–diesel power systems to meet the electrical load of 100 typical residential buildings (with annual electrical energy demand of 3512 MWh). The monthly average wind speeds range from 3.3 to 5.6 m/s. The hybrid systems simulated consist of different combinations of 600 kW commercial wind machines supplemented with diesel generators. The National Renewable Energy Laboratory's hybrid optimisation model for electric renewables software was employed to perform the techno-economic analysis. The simulation results indicate that for a hybrid system comprising 600 kW wind capacity together with a 1.0 MW diesel system (two 500 kW units), the wind penetration (at 50 m hub-height, with 0% annual capacity shortage) is 26%. The cost of generating energy (COE, $/kWh) from this hybrid wind–diesel system was found to be 0.070 $/kWh (assuming diesel fuel price of 0.1 $/l). The study exhibits that for a given hybrid configuration, the number of operational hours of diesel generator sets (gensets) decreases with an increase in the wind-farm capacity. Concurrently, emphasis has also been placed on wind penetration, un-met load, effect of hub-height on energy production and COE, excess electricity generation, percentage fuel savings and reduction in carbon emissions (relative to diesel-only situation) of different hybrid systems, cost breakdown of wind–diesel systems, COE of different hybrid systems, etc.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.