Economic and Environmental Assessment Using Two Renewable Sources of Energy to Produce Heat and Power for Industrial Applications

Abstract

Economic criteria have prevailed in studies on integration of renewable energies. Tons of dangerous emissions are emitted by a biomass fuel, causing negative impacts over atmosphere and health. Current research proposes Pinch Analysis of solar thermal energy and the joint use of biomass (sugarcane bagasse) to produce heat and power in a Caribbean sugar mill; measuring emissions like: carbon oxide CO, carbon dioxide CO2, dinitrogen monoxide N2O, nitrogen oxides NOx, sulfur oxides SOx, non-methane volatile organic compounds NMVOC, methane CH4, and particulate matters, to have a global and clear view of the impacts of biomass as a renewable fuel. Variables like kWh cost, the installation and device area of renewable energy, and greenhouse gas emissions, are analysed to assess the effect on the integration final design, the target of which is to control the use of biomass. It is possible to produce an economically competitive integration design of solar system LCOEth solar = 0.0636 USD/kWh, LCOEele = 0.1392 USD/kWh), zero greenhouse gases emissions (ΔTminrew=7 °C), and deletion of 378,711.53 t/year of CO2 and 9567.56 t/year of solid particles. There are many possibilities that can implemented; in one of them, bagasse burning is reduced by 30% and the solar collector network for required power production is reduced by 68%.