Abstract
Abstract EASIROC, standing for Extended Analogue Si-pm Integrated ReadOut Chip is a 32 channels fully analogue front end ASIC dedicated to readout SiPM detectors. This low power and highly versatile ASIC was developed from the chip SPIROC[1] which has been designed for the Analogue Hadronic Calorimeter foreseen at the International Linear Collider. EASIROC integrates a 4.5 V range 8-bit DAC per channel for individual SIPM gain adjustment. A multiplexed charge measurement from 160 fC up to 320 pC is available thanks to 2 analogue outputs. These charge paths are made of 2 variable gain preamplifiers followed by 2 tuneable shapers and a track and hold. A trigger path integrates a fast shaper followed by a discriminator the threshold of which is set by an integrated 10-bit DAC. These 32 trigger outputs can be used for timing measurements. The power consumption is lower than 5 mW/channel and unused features can be powered OFF to decrease the power. The chip has been designed in AMS 0.35 μm SiGe technology and 4000 dies have been produced in 2010. Its versatility allows its use in many photo detector experiments and is already used for PEBS, MuRAY, J-PARC and medical imaging.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.