Abstract

A noise attenuation performance test was conducted on earmuffs using a recoilless weapon launch platform in a confined space, along with two acoustic test fixtures (ATFs). The overpressure at the ATF's effective tympanic membrane comprised direct sound at 185 dB sound pressure level (SPL) and reflected sound at 179 dB SPL. Wearing earmuffs reduced these peaks to 162 dB SPL and 169 dB SPL, respectively. The reflected sound from walls was defined as delayed sound. An analytical model for earmuff noise attenuation simulated their effectiveness. The simulation revealed that when the earmuffs attenuated delayed sound, the acoustic impedance of acoustic leakage and the acoustic impedance of the earmuff material decreased by 96% and 50%, respectively. The negative overpressure zone between direct and delayed sound decreased the earmuffs' fit against the ATF. Additionally, the enclosed volume between the earmuff and the ear canal decreased by 12%. After the installation of bandages on the earmuffs, the overpressure peak of delayed sound was reduced by 5 dB. Furthermore, the acoustic impedance of the earmuff's sound leakage path and the acoustic impedance of the earmuff material deformation path increased by 100% and 809%, respectively.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.