Abstract

T-Mg32(AlZnCu)49 phase-strengthened Al–Mg–Zn–Cu alloys have shown a promising age-hardening response. However, the age-hardening mechanism underlying the different heat treatments is not clear during the early-stage precipitation. Additionally, the lack of information on the early-stage precipitation impedes the development of this series alloys. In this study, the formation of the Guinier-Preston (GP) zone and T′-phase of the novel Al–Mg–Zn(-Cu) alloys during the early-stage precipitation has been investigated using transmission electron microscopy and atom probe tomography analysis. Investigation revealed that the Cu content and thermal treatment had significant effects on the microstructure evolution of the alloys. GP zones were observed to act as sites for the formation of the T′-phase. The higher number density of Cu-incorporated GP zones led to higher strength and bake-hardening response after pre-aging. Occasionally, some GPI zones were observed to dissolve into the Al matrix without further transforming into T′ precipitates during natural aging (NA). Pre-aging prior to NA facilitated stable GP zone formation and mitigated the negative effect of NA. Furthermore, the precipitates were grown to an appreciable size after single-step aging at 180 °C, which adversely affected the mechanical properties of the novel alloys. The present findings provide an efficient guideline for designing the T-phase in the crossover Al–Mg–Zn-(Cu) alloys.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.