Dytiscus lapponicus-Inspired Structure with High Adhesion in Dry and Underwater Environments.

Abstract

The epidermal adhesive structure of many animals generates reliable adhesion on their engaged surfaces. However, current bio-inspired adhesion structures are difficult to function well in dry and underwater environments simultaneously. Interestingly, the male Dytiscus lapponicus attaches firmly to the rough shell of the female D. lapponicus in both dry and underwater conditions owing to the adhesive setae of its forelegs, and to the best of our knowledge, designing adhesive structures on multienvironments has never been reported. Here, a D. lapponicus-inspired adhesion structure (DIAS) is proposed and fabricated using double-exposure-fill molding technology accompanied with the material curing shrinkage, in which different structural features could be achieved by varying curing shrinkage ratios, elastic moduli, and back exposure time. The DIAS offered high, reversible, and repeatable strength in dry and underwater conditions with values of 205 and 133 kPa, respectively. By comparing the adhesion properties of different shapes via testing experiments and numerical analysis, a structural feature with an inclination of 15° was found to be optimal. Finally, the potential application of the DIAS in flexible electronic smart skin-attachable devices was demonstrated on a pig skin, paving the way for further bio-inspired adhesive designs for both dry and wet scenarios.