Abstract
Spindle system design requires the simulation of dynamic characteristics with consideration of joint characteristics. A spindle system modelling method using a spindle tool holder and bearing joints was presented for the prediction of dynamic behaviours. A substructure receptance coupling method was used to model the joints of the spindle tool holder and bearings, and the identification method of joint parameters was developed. The parameters of spindle tool holder joint were identified from the experimental platform based on the distributed model, and the parameters of the bearing joints were obtained by the Hertzian contact. Timoshenko beams were used to describe the spindle system components. The modal and harmonic response analysis was performed to predict the dynamic characteristics of the spindle system. The prediction results of natural frequency and the dynamic response were validated by impact testing. The model showed a good match for predicting the dynamic characteristics of the spindle system. The presented modelling method is useful in the performance evaluation of spindle system.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
