Dynamics of ultra-high-speed (UHS) spindles used for micromachining

Abstract

Micromachining dynamics commonly dictate the attainable accuracy and throughput that can be obtained from micromachining operations. The dynamic behavior of miniature ultra-high-speed (UHS) spindles used in micromachining critically affects micromachining dynamics. As such, there is a strong need for effective techniques to characterize the dynamic behavior of miniature UHS spindles. This paper presents a systematic experimental approach to obtain the speed-dependent two-dimensional dynamics of miniature UHS spindles through experimental modal analysis. A miniature cylindrical artifact with 5mm overhang is attached to (and rotating with) the spindle to enable providing the dynamic excitations to and measuring the resulting motions of the spindle. A custom-made impact excitation system is used to reproducibly excite the spindle dynamics up to 20kHz while controlling the impact force. The resulting radial motions of the spindle are measured in two mutually perpendicular directions using two independent fiber-optic laser Doppler vibrometers (LDVs). To ensure the mutual orthogonality of the measurements, the two lasers are aligned precisely using an optical procedure. A frequency-domain filtering approach is used to remove the unwanted spindle motion data from the measurements, thereby isolating the dynamic response. The spindle dynamics is then represented in the form of frequency response functions (FRFs). A global curve-fitting technique is applied to identify natural frequencies and damping ratios. The developed approach is demonstrated on a miniature UHS spindle with aerodynamic bearings, and dynamic characteristics are analyzed at different spindle speeds and collet pressures. The spindle speed is shown to have a significant effect on dynamic response, especially at higher spindle speeds, while the collet pressure is observed not to have any significant effect on the spindle dynamics. It is concluded that the presented approach can be used to characterize the dynamics of miniature UHS spindles effectively.