Dynamics of a mass–spring–beam with 0:1:1 internal resonance using the analytical and continuation method

Abstract

The nonlinear harmonic response of an autoparametric system comprised of a linear oscillator with a vertically attached flexural beam is investigated and the capability of the beam as a vibration absorber is assessed. A weak torsional spring is used for constraining the rotation of the beam giving rise to an almost non-flexural rotational mode with a low frequency. The system parameters are also tuned to enforce the zero-to-one-to-one internal resonance condition. The Lagrange’s formulation accompanied by the assumed-mode method is used to derive the discretized equations based on the order three nonlinear Euler–Bernoulli beam theory. An analytical solution is developed based on the method of multiple scales where the generalized coordinate corresponding to the non-flexural rotational mode is approximated by higher order perturbation expansion than the other coordinates, due to much larger contribution of the non-flexural rotation to the response. Comprehensive response and bifurcation analysis are performed using analytical and direct numerical solutions. The results are obtained for vertically-aligned and also initially inclined beams and various interesting behaviors are recognized for different non-dimensional system parameters. Different types of bifurcations such as the Pitch-fork, Hopf, Period-doubling and symmetry breaking bifurcations are observed in the solution of slow-flow equations and some of them are found to be beneficial for vibration absorption in a limited range of excitation amplitudes and frequencies.