Dynamically vulcanized blends of polypropylene and ethylene octene copolymer: Influence of various coagents on thermal and rheological characteristics

Abstract

AbstractThe present study focuses on the influence of the three structurally different coagents, namely triallyl cyanurate (TAC), trimethylol propane triacrylate (TMPTA) and N,N′‐m‐phenylene dimaleimide (MPDM) on the thermal and rheological properties of thermoplastic vulcanizates (TPVs) based on the polypropylene (PP) and ethylene octene copolymer (EOC). Depending on the structure and reactivity, different coagents show different behaviors. All the TPV compositions were made by melt mixing method in a Haake Rheomix at 180°C. Rheological properties have also been evaluated at the same temperature. Viscoelastic properties of the TPVs were analyzed by a dynamic oscillatory rheometer in the melt state in a Rubber Process Analyzer (RPA 2000). Morphologically, TPVs consist of dense crosslinked rubber domains dispersed in a continuous thermoplastic matrix. The crosslinked rubber particles have a tendency to form agglomerates and build local clusters which undergo disintegration by shearing. A variety of rheological characteristics such as Payne effect, shear rate sensitivity, modulus recovery and dynamics of relaxation were studied by performing strain sweep, frequency sweep and stress relaxation tests. Among the various coagents taken for investigation, MPDM‐based TPVs show improved dynamic functions (complex modulus and complex viscosity) and lower rate of stress relaxation over TAC, TMPTA and the control sample without any coagent. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010