Dynamic vulcanization of polyethylene‐based thermoplastic elastomer blends

Abstract

AbstractIn this investigation, the effects of blending with ethylene–propylene–diene terpolymer and subsequent dynamic curing with sulfur on the macromolecular structure and properties of pure low‐density polyethylene and high‐density polyethylene were studied. The crosslinking efficiency of polyethylene‐based ethylene–propylene–diene terpolymer blends upon dynamic curing was assessed with torque and gel content measurements. The curing of dispersed ethylene–propylene–diene terpolymer in a polyethylene matrix improved both the mechanical and thermomechanical properties as a result of the formation of a crosslink structure in the rubber phase. In view of the electrical applications of this cured blend material, the volume resistivity was measured. The thermal stability of vulcanized polyethylene/ethylene–propylene–diene terpolymer blends was found to be superior to that of unvulcanized blends. In scanning electron microscopy analysis, good interface bonding between the polyethylene matrix and dispersed ethylene–propylene–diene terpolymer was observed for the cured blends. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010