Abstract
The sensitivity of 1-3 piezocomposites can be improved by the addition of a third phase or interlayer around the piezoceramic rods which results in a composite with 1-1-3 connectivity. In the current investigation, dynamic surface displacements of both 1-3 and 1-1-3 piezocomposites were measured using a laser Doppler heterodyne interferometer. Dynamic displacement profiles showing the nonuniform deformation of the piezoelectric rod and the nonpiezoelectric polymer were obtained at 10 Hz, 100 Hz, and 1.0 kHz. Measurements of the displacement at the center of the piezoelectric rod were performed over the frequency range from 10 Hz to 27 kHz. Three different interlayer conditions were considered. The experimental measurements demonstrated that both the surface displacement profile and the maximum rod displacement varied with frequency and interlayer properties. The dynamic displacement profiles were also compared with previously measured static displacement profiles.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
