Abstract

Compression tests were carried out on samples of commercial-purity titanium charged with up to 4.7 at. pct hydrogen. Strain rates of 10−3 to 1 s−1 were employed and testing was limited to the α phase field at temperatures of 773 to 973 K. The dependences of the flow stress on strain, strain rate, and temperature were determined. A plateau or bulge appeared in the temperature and strain-rate dependences of the flow stress, and the work-hardening rate also showed peaks. Serrations were observed on some of the stress-strain curves. All these features indicated that dynamic strain aging (DSA) was occurring. Analysis of the results (together with data from other authors) indicates that there are three ranges of DSA behavior in this material within the experimentally investigated temperature range; these appear to be associated with the diffusion of iron, carbon, and oxygen, respectively. Alloying with hydrogen decreases the magnitude of the DSA attributable to these elements and displaces the phenomenon to higher temperatures and/or to lower strain rates. The dependence on strain rate and temperature of the relative softening attributable to hydrogen addition was determined. The results indicate that hydrogen-induced softening is related to the occurrence of DSA in this temperature range. Possible explanations for this relationship are discussed.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call