Dynamic Simulation Model and Experimental Validation of One Passive Fuel Cell–Battery Hybrid Powertrain for an Electric Light Scooter

Abstract

Given the escalating issue of climate change, environmental protection is of growing importance. A rising proportion of battery-powered scooters are becoming available. However, their range is limited, and they require a long charging time. The fuel cell–battery-powered electric scooter appears to be a promising alternative. Further development of the active hybrid is the passive hybrid, in which the fuel cell is directly coupled to the battery, eliminating the need for a DC/DC converter. The passive hybrid promises the possibility of a reduction in the installation volume and cost. A simulation model is created MATLAB/Simulink for the passive fuel cell–battery hybrid electric scooter. It specifically focuses on how the power split between the fuel cell and battery occurs under dynamic load requirements. The scooter is powered by two air–hydrogen Proton Exchange Membrane Fuel Cell (PEMFC) systems with a nominal power of 250 W each and a Li-ion battery (48 V, 12 Ah). The validation is performed following an ECE-R47 driving cycle. The maximum relative deviation of the fuel cell is 2.82% for the current value. The results of the simulation show a high level of agreement with the test data. This study provides a method allowing for an efficient assessment of the passive fuel cell–battery hybrid electric scooter.