Dynamic shearing resistance of hydroxyl-terminated polybutadiene (HTPB)

Abstract

Hydroxyl-terminated polybutadiene (HTPB) is a widely used polymeric binder in polymer-bonded explosives (PBXs) and solid rocket propellants. Even though used in small fractions, the elastomeric binder absorbs much of the impact energy and therefore requires careful modeling of its mechanical behavior to accurately simulate the response of PBXs when they are subjected to large strains and strain rates. While the normal response of HTPB has been characterized under uniaxial stress and uniaxial strain loading, shear strength measurements under large pressures and large shear strain rates have not been made so far. Such measurements are critical for modeling localization and failure in PBXs and accurate prediction hotspot formation. In this study, pressure-shear plate impact (PSPI) experiments have been used to measure the shearing resistance of HTPB at different pressures. The shearing resistance of HTPB is found to be strongly pressure dependent. A quasi-linear viscoelastic model with pressure-dependent shear wave speeds and shearing resistance is used to describe the experimentally observed dynamic response of HTPB. The model consists of an instantaneous elastic response and viscoelastic relaxation of the elastic response.