Dynamic shear strength of precast connection with UHPC-based and traditional grouted sleeves: Test, simulation, and analytical formulas

Abstract

Dynamic shear strength is critical for ensuring the integrity of prefabricated structures with grouted sleeve connections under dynamic loads such as impacts and earthquakes. However, studies have yet to be conducted to clarify the dynamic shear strength of grouted sleeve connections for designs. To this end, this study systematically investigated the dynamic shear behavior of precast connection with grouted sleeves through physical experiments, numerical simulations, and theoretical analysis. Drop hammer impact tests were performed on nine precast connection specimens that differ in amounts of impact energy, axial loads, rebar ratios, and grouting materials. Experimental data indicated that the dynamic shear performance of the ultra-high-performance concrete (UHPC)-based connections is superior to that of traditional grouted sleeve connections. The impact-induced displacement of a grouted sleeve connection is very sensitive to the amount of impact energy. Detailed finite element (FE) models were further developed to examine the dynamic shear strength of precast connections. Good agreements are observed between the numerical results and experimental data, demonstrating the rationality of the developed FE modeling method. It was found that the dynamic shear strengths of grouted sleeve connections are more sensitive to axial load levels and concrete strength grades than rebar ratios. Based on extensive simulation results obtained from the validated modeling method, the analytical formulas were proposed to predict the dynamic increase factor (DIF) and shear strength of precast connections. The analytical results predicted by the proposed formulas agree well with the FE results, demonstrating the applicability of the proposed formulas.