Dynamic rolling process of tires as layered structures

Abstract

Due to inner pressure the tire is a prestressed system of cord layers. The cord layers are covered by rubber layers. The whole structure is coated by a wear-resistive thread and a soft side wall coating. Serving as a boundary condition at the cord ends is a steel ring at both sides of the wheel rim. To stiffen the thread the structure has a steel cord belt with a ply angle of ±20° to the circumferential direction. The rolling system works like a spring with changing contact forces, and to compute the car dynamics it is necessary to take into account a high frequency and nonlinear varying contact. The forces between tire and road are limited by friction which gives rise to high frequency friction oscillations. Also the structural dynamics of the tire is nonconservative and self-excited, and an appropriate damping of cords and rubber is needed to stabilize the system dynamically. The computing static equilibrium and equations of motion of a continuum mechanics membrane model are treated, and the discretization to a multi-masspoint model is shown. The resulting nonlinear system of Newtonian equations is solved by using the predictor-corrector integration method in time. The time step of integration is due to the highest frequency of the system, and it is ten times shorter than the minimum of oscillation time in the system. All the nonlinearities, the hysteretic damping, and small bending moments of the rubber layers are taken into account to compute the nonstationary rolling with slip and spin on uneven roads or soft ground.