Dynamic response of a torsional micromirror to electrostatic force and mechanical shock

Abstract

In this paper dynamic characteristics of a capacitive torsional micromirror under electrostatic forces and mechanical shocks have been investigated. A 2DOF model considering the torsion and bending stiffness of the micromirror structure has been presented. A set of nonlinear equations have been derived and solved by Runge–Kutta method. The Static pull-in voltage has been calculated by frequency analyzing method, and the dynamic pull-in voltage of the micromirror imposed to a step DC voltage has been derived for different damping ratios. It has been shown that by increasing the damping ratio the dynamic pull-in voltage converges to static one. The effects of linear and torsional shock forces on the mechanical behavior of the electrostatically deflected and undeflected micromirror have been studied. The results have shown that the combined effect of a shock load and an electrostatic actuation makes the instability threshold much lower than the threshold predicted, considering the effect of shock force or electrostatic actuation alone. It has been shown that the torsional shock force has negligible influence on dynamic response of the micromirror in comparison with the linear one. The results have been calculated for linear shocks with different durations, amplitudes, and input times.