Abstract

Vestibulocollic (VCR) and vestibulo-ocular (VOR) reflexes were studied during angular rotation in the horizontal plane in precollicular decerebrate cats. Angular position was modulated by sinusoids or sums of sinusoids with frequencies ranging from 0.05 to 5 Hz. Reflex motor output was measured by recording electromyographic (EMG) activity of the lateral rectus and dorsal neck muscles and discharge of abducens motoneurons. Measured with respect to input angular acceleration VCR motor output displayed a second order lag at low frequencies, bringing mean EMG phase (-136 degrees) and gain slope (-35 dB/decade) close to those of an angular position signal at 0.2 Hz. At higher frequencies the lag was counteracted by a second order lead bringing mean phase (-52 degrees) and gain slope (-5.6 dB/decade) back close to those of an angular acceleration signal at 3 Hz. By contrast, mean phase (-113 degrees to -105 degrees) and gain slope (-21 to -28 dB/decade) of the VOR motor output remained close to those of an angular velocity signal across the entire frequency range. The data suggest that neural pathways producing the VCR receive selective input from "irregular type" horizontal semicircular canal afferents which provide one lag and one lead in the overall transfer function while the other lag and lead are produced by central pathways. Transection of the medial longitudinal fasciculus (MLF), which eliminates all of the most direct (three neuron) arcs of the horizontal VCR, did not cause any detectable change in the horizontal VCR at either low or high frequencies. Reductions in overall gain occurred in some cases but these could be attributed to damage to axons outside the MLF. Less direct pathways, probably including vestibuloreticulospinal pathways, are thus able to produce both the low-frequency, phase-lagging and high-frequency, phase-leading components of the horizontal VCR.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call