Abstract
AbstractTwo sets of dynamic mechanical property data and some stress relaxation data for semicrystalline, linear polyethylene are treated by data reduction methods previously described. These data can be represented by a master plot of reduced modulus versus reduced frequency and two sets of temperature‐dependent shift factors. The first of these factors reflects the change of viscoelastic relaxation times with temperature. The second represents a separable change of modulus with temperature which applies over the entire time or frequency range of the experiments. This change is larger and in the opposite direction to that found applicable in the behavior of noncrystalline plastics and rubbers. The two sets of dynamic data show the same frequency–temperature dependence which can be represented by an activation energy of 22 kcal./mole. Small differences in the modulus–temperature dependence are attributed to differences in molecular weight or annealing conditions. The stress relaxation data superposes to a curve in good agreement with the dynamic data but with a factor of 20 difference in time scale. This difference is attributed to the finite strains used in the stress relaxation measurements. Such strains might be expected to increase free volume in simple extension deformations and so accelerate the relaxation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have