Dynamic mechanical analysis of oil palm microfibril‐reinforced acrylonitrile butadiene rubber composites

Abstract

AbstractThe dynamic mechanical properties of microfibers of oil palm‐reinforced acrylonitrile butadiene rubber (NBR) composites were investigated as a function of fiber content, temperature, treatment, and frequency. The storage modulus (E′) was found to increase with weight fraction of microfibrils due to the increased stiffness imparted by the strong adhesion between the polar matrix and the hydrophilic microfibrils. The damping properties were found to decrease with increase in fiber loading. As the fiber content increases, the damping nature of the composite decreases because of the increased stiffness imparted by the natural fibers. By steam explosion method (STEX), microfibrils are separated from fibers. Natural fibers were undergone treatment such as mercerization, benzoylation, and silane treatment. The NBR is modified by the addition of resorcinol‐hexa‐hydrated silica (HRH) bonding agent. Also dicumyl peroxide (DCP) is used as an alternating vulcanizing agent in the system. In the case of composites containing chemically modified fibers, storage modulus were found to increase. Cole–Cole analysis was made to study the phase behavior of the composite samples. Activation energy for the relaxation processes in different composites was calculated. Morphological studies using scanning electron microscopy of tensile fracture surfaces of treated and untreated composites indicated better fiber matrix/adhesion in the case of treated microfibril‐reinforced composites. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers