Dynamic mechanical analysis and its relationship to impact transitions

Abstract

AbstractDetailed, instrumented impact tests were carried out between about − 100 and 60°C for flexible poly(vinyl chloride) (PVC), ethylene vinyl acetate (EVA), and polypropylene (PP) films. Secondary impact transitions in addition to the main transitions were detected for all three films, indicating that multiple impact transitions may be far more general in occurrence than commonly expected. Wide frequency (from 0.05 to 100 Hz) dynamic mechanical spectra of the same materials were also generated over similar temperature ranges. A new data treatment method was proposed whereby the material dissipation function was evaluated by summing the responses over broad frequency ranges of the loss modulus and the impulse spectrum. The dissipation function when plotted as a function of temperature was found to accurately (to within 3 to 5°C) predict the location of the main impact transitions for all three polymers. In addition, the existence and location of the secondary impact transitions for both PVC an PP were predicted. Both the functional form and the temperature match between the experiments and predictions strongly support the validity of the proposed method. However, some discrepancy remained in predicting the very low temperature (−65°C) impact transition for EVA.