Abstract
This paper is concerned with a methodology to identify the dynamic material properties of the heat-affected zone (HAZ) near the base metal in a resistance spot weld process at various strain rates. In order to obtain the dynamic material properties of the HAZ in the spot-welded steel sheet, specimens are prepared to have similar material properties, hardness and microstructure to the actual HAZ. Such thermally simulated specimens are fabricated with the material thermal cycle simulator (MTCS) and compared with the real one for the hardness and microstructure. Dynamic tensile tests are then conducted with a high speed material testing machine. Stress–strain curves of the thermally simulated HAZ are obtained at various strain rates ranged from 0.001/sec to 100/sec. Obtained material properties are applied to the finite element analysis of the spot-welded tensile-shear specimen in order to verify validity of the proposed testing methodology and obtained results. Analysis results demonstrate that the material properties obtained are appropriate for the FE analysis of spot-welded specimens.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
