Dynamic instability of supercritical driveshafts mounted on dissipative supports—Effects of viscous and hysteretic internal damping

Abstract

The case of a rotating shaft with internal damping mounted either on elastic dissipative bearings or on infinitely rigid bearings with viscoelastic suspensions is investigated in order to obtain the stability region. A Euler–Bernoulli shaft model is adopted, in which the transverse shear effects are neglected and the effects of translational and rotatory inertia, gyroscopic moments, and internal viscous or hysteretic damping are taken into account. The hysteretic damping is incorporated with an equivalent viscous damping coefficient. Free motion analysis yields critical speeds and threshold speeds for each damping model in analytical form. In the case of elastic dissipative bearings, the present results are compared with the results of previous studies on finite element models. In the case of infinitely rigid bearings with viscoelastic suspensions, it is established that viscoelastic supports increase the stability of long shafts, thus compensating for the loss of efficiency which occurs with classical bearings. The instability criteria also show that the effect of the coupling which occured between rigid modes introducing external damping and shaft modes are almost more important than damping factor. Lastly, comparisons between viscous and hysteretic damping conditions lead to the conclusion that an appropriate material damping model is essential to be able to assess these instabilities.